---
article_id: 2831
title: "Allow IoT Sensors to Directly Populate Meter Readings"
original_article_url: "https://blog.facilitybot.co/blog/knowledge-base/manager-web-portal/allow-iot-sensors-to-directly-populate-meter-readings/"
category: "FacilityBot > Manager Web Portal"
last_updated: "2025-06-19T12:23:27Z"
needs_review: false
---

# Allow IoT Sensors to Directly Populate Meter Readings

The [Sensors](https://blog.facilitybot.co/knowledge-base/manager-web-portal/mqtt-integrations/) feature in FacilityBot supports IoT sensors. IoT sensors can be directly linked to meters to automatically populate [meter readings](https://blog.facilitybot.co/knowledge-base/manager-web-portal/meters-feature/).

https://youtu.be/rHBQ67o-QmE

## Connecting a Sensor to FacilityBot

- Log in to FacilityBot.
- Go to Integrations, Sensors, then click on the Sensors tab.
- To create a new sensor in FacilityBot, click on + New Sensor.

![](https://blog.facilitybot.co/wp-content/uploads/2025/06/F8DB_FIvxguNQE07RHe5rOZKCZllTAN3r9Y9nzAwPqT45hBCs74UdvnZGpJCGvQHHP9wlB8KBjLYJEN4aJM86OrEqRNoeySNqCTFDv7qR-jpwb5VH_Ez1c00kTxXBn4DXwqsE13I-gfaja9dd2SV4CI.png)

- A floating editing panel will appear where you can enter the details of the sensor.
- Enter the device name.
- Set the parameter for this sensor that FacilityBot will use to populate meters or trigger requests
- Enter the trigger condition and the minimum interval between triggers.

![](https://blog.facilitybot.co/wp-content/uploads/2025/06/q2CTLoRUrSPBANfUc37HxICagYCaeOIzfphmLDTVc8Ng0QO2JuxEfg7VrLtoqpMPc-dGNeUvHris_quVM2gWnrZht-SeGEFvgT8APeJ2hehfGbVVzqmhHTEkmAJlHr7UokByB_ecPx6WRlbba67byOo.png)

- Link this Sensor to a Meter to automatically populate meter readings from this Sensor by clicking on the Add Meter button.

![](https://blog.facilitybot.co/wp-content/uploads/2025/06/LtCRYDmdgPyJOpS0XZxrlnVsAp_5q7KA0hA6T9ixiDWKyB3_PNGMlPLjNSwGRcPWVqdLk2YwhcnQfLLbXQ2TzSXiJ12_XjniKBBBt-eDQQTiSomk5fcCS5bcUGQL6oxmrBFOKaro8-RGHN2eTbyKU4U.png)

- If the sensor sends multiple fields in its JSON output, use the &#96;Add Parameter&#96; button to add more parameters.

![](https://blog.facilitybot.co/wp-content/uploads/2025/06/ihhVehXhIyhjcyXKMxe39k0j0nWUyuN9kRjCtDFR_Glrt5mhFeEytNxVXhUNcW3yWyIpKQzQG2s390btbSRyoTTp0LuJvcuZsxVwehJDI_JDep9eu9Uu5GdTfxUBaD8nWuLhZ7WMFYDoEmaNRR6FaVA.png)

- If the sensor sends a timestamp in its JSON output, use the &#96;Add Timestamp Parameter&#96; button to specify the name of that timestamp field.

![](https://blog.facilitybot.co/wp-content/uploads/2025/06/WaY4-PO7hEvUWRpJmeGr8u3VJjHCqgiZLwWnsT0vqaY-yFtJ1rPMwpjron9ElwWYGFVxqoIhSX1rKlU5jtH1O0VId4YH0fqpnPFGxrPrfBpzJFDCMvuK7N4MDJ_fWJ4Wp8f2JiqS3pxOo46wjyaQlok.png)

- If there is no timestamp sent by the sensor, FacilityBot will automatically create a timestamp using the system time.

## Sending Test Data

To send test payload data,

- Hover on the sensor and click on the “Send Test Data” icon.
- A panel will appear on the right. Here, you can enter the payload data. Payload data should consist of the parameters (and timestamp if any) that were configured above sent in a JSON format.

**(Note: The parameter fields are case sensitive, so please ensure the parameter names and timestamp parameter name should be exactly the same as the JSON output.)**

![](https://blog.facilitybot.co/wp-content/uploads/2025/06/w0BZTGhqgllciBC5wQupK_RqD5aHM0kUhCcvdHBbQrCXxjyA47awXsHpqBMK7c2vWe7LehrqYkQibTa4GG8qplOp_OwSJ91Lq4zGSbZp4l7Xg06bLKJDl-pLvUBJ07I3vfWisV5IDGnBffnW1Af9cI.png)

- Once sent, the sensor will automatically populate meter readings.
