---
article_id: 1934
title: "Configuring Fault Types"
original_article_url: "https://blog.facilitybot.co/blog/knowledge-base/manager-web-portal/fault-types/"
category: "FacilityBot > Manager Web Portal"
last_updated: "2025-07-01T15:57:29Z"
needs_review: false
---

# Configuring Fault Types

Fault Types are used to identify different types of faults that Requestors can report. Each [Fault Report](https://facilitybot.co/features/fault-reporting) is linked to a Fault Type. This allows them to be managed by what kind of fault has happened. Fault Types can be used to set up [automatic workflows](https://blog.facilitybot.co/knowledge-base/workflows/automating-workflows/) to assign [requests](https://blog.facilitybot.co/knowledge-base/manager-web-portal/requests/) to Responders depending on the fault. They can also be used to break down and analyse report data.

Each [Fault Type](https://blog.facilitybot.co/knowledge-base/manager-web-portal/fault-types/) can also have multiple Sub-Types. Fault Sub-Types are useful to classify the fault in more specific detail.

https://www.youtube.com/watch?v=WHdNwK8b7bQ&amp;feature=youtu.be

# How to Create a New Fault Type

1. Log into FacilityBot.
2. Open the “Settings” menu from the bottom left icons.
3. Select “Requests”, then select the “Fault Types” tab.
4. Select the “+New” button at the far right. A floating window appears to create a new Fault Type. Up to 9 Fault Types may be created at any one time.
5. Give the Fault Type a name. Fault Type names cannot be repeated if one with the same name has already been created.
6. Create any sub-types by clicking and typing in the “Fault Sub-Type Tags” field. Press Enter or click again to finish each sub-type and start a new one.
7. Click “OK” at the bottom right of the floating window to finish creating the Fault Type and add it to the list in the main window.

# How to Modify or Delete an Existing Fault Type

1. Mouse-over the Fault Type in the main window to reveal floating “pencil” and “dustbin” icons at its far right.
2. Modify the Fault Type: Click the “pencil” icon to edit the Fault Type. Delete the Fault Type: Click the “dustbin” icon to delete the Fault Type.
3. Clicking the “pencil” icon will open a floating editing panel on the right.
4. Modify the name of the Fault Type in the editing panel using the “pencil” icon to its right.
5. Create sub-types by clicking and typing in the “Fault Sub-Type Tags” field. Press Enter or click again to finish each sub-type and start a new one.
6. Delete sub-types using the “x” icons on each sub-type.
7. Click “Update” at the bottom right of the editing panel to finish editing and go back to the main window.

(Note: Delete the Fault Type: you can also delete the Fault Type in the editing panel using the “dustbin” icon near the top right, above the Name field.)
